3D printing, laser & CNC · Kickstarter follow-up
Snapmaker 2.0
A shared frame for printing, engraving, and carving has practical appeal when shop space is tight. The older A350 and A350T reviews show usable results across those jobs, alongside time spent swapping hardware and working within the original laser’s limits. Configuration matters when translating those experiences into a buying decision.
- Research checked
- Documented stage
- Campaign ended · Published hands-on reviews
Original campaign funding period: May 7 to June 6, 2019. Reviewers subsequently used A350/A350T machines; this establishes review evidence, not fulfillment of every pledge.
What the follow-up reviews show
- Reported experience. Tom’s Hardware produced PLA and TPU prints on the A350T, but found the supplied profiles slow. Its review also documented many screws in the original work-surface swaps and recalibration when returning to printing. Source 2
- Reported experience. CNCSourced completed a thin-wood box with the A350’s original laser and reported accurate cuts. It characterized that head as useful for light cutting, with limited capacity for thicker or harder material. Source 3
- Published specification. The current manufacturer page lists a Quick Swap Kit and stronger laser and CNC modules. Those listings describe available options; the older reviewers did not establish their present-day performance. Source 4
- What it means. For a workshop using all three processes, shared space may justify extra setup. For frequent repetitive work, compare actual changeover time and the exact modules against separate machines before deciding. Source 2 Source 3
Research synthesis. Jerry has not supplied ownership or firsthand tests of this machine. Reviews cover older A350/A350T configurations; upgraded modules and current software need separate evidence.
Questions for your setup
- Which modules and Quick Swap hardware are included in the exact configuration?
- How often would the shop change between printing, laser work, and carving?
Read the original sources
- Original Snapmaker 2.0 campaign Kickstarter / Snapmaker. Published 2019-05-07. Checked .
- Snapmaker 2.0 Modular 3-in-1 review Tom’s Hardware · Denise Bertacchi. Published 2022-09-02. Checked .
- Snapmaker 2.0 laser and CNC toolhead tests CNCSourced. Published 2023-10-30. Checked .
- Current Snapmaker 2.0 module information Snapmaker. Checked .